Expert Answers about Chevrolet Exhaust Tips
- Availability of an Exhaust Tip for a 2001 Chevy Suburban 1500
- The MagnaFlow 5 Inch Exhaust Tip, # MF35183, is designed to be welded onto a 4 inch tail pipe. If the tail pipe on your 2001 Chevy Suburban is 4 inches in diameter and you have side exit exhaust, this tip will fit. For weld on applications, we recommend having it professionally installed.
If you find your tail pipe has a different diameter or you do not want a weld on application, we have numerous other diameter pipes and clamp on applications that may work for your Suburban. I have included...
view full answer... - 36 Inch Exhaust Tailpipe and Resonator Tip for Vehicle
- The longest exhaust tip that we stock at this time for a 2-1/4 inch tube is the MagnaFlow 3-1/2 inch Exhaust Tip, # MF35217, which is 18 inches long.
It sounds as if you are looking for a tailpipe and resonator tip for your vehicle. If you could send us the Year-Make-Model of your vehicle and any other information that would be helpful in selection of a tailpipe and an exhaust tip, I would be glad to help in any way I can.
view full answer... - Availability of Turn Down Exhaust Tip For 2-3/4 Inch Exhaust On 2014 Toyota 4Runner
- We have several straight bolt or clamp-on exhaust tips which you can see by clicking the provided link, but none of the options offer a turn down or out. However, we do offer a weld-on option for a 2-3/4 inch tailpipe that has a turn down or out, part # MF35179.
If you don't weld, a local muffler shop should be able to install that for you quickly and easily.
view full answer... - Rear Exit Exhaust Pipes for a 1999 Doge Durango
- The exhaust systems that we have for the 1999 Doge Durango, see link, follow the same path as the factory exhaust which does happen to be rear exit with a single pipe. To make any additional modifications you would need to take the vehicle to a muffler shop or a place that does customization on vehicles.
If you are looking just for exhaust tips then we have several options available. I have included a link to the exhaust tip main page for you.
view full answer... - Availability of Slip-On Exhaust Tip with 2 inch Diameter Inlet
- The closest I can come to the dimensions you mention would be the # MF35208 which is compatible with a 2-1/4 to 2-1/2 inch tailpipe, has a 3 inch diameter outlet and is 12 inches long.
Unfortunately, none of the exhaust tips we offer have a 2 inch inlet.
view full answer... - Is A Trailer Hitch Available For My 2011 Subaru Impreza WRX 5-Door Wagon w/ Dual Exahaust
- For your 2011 Subaru Impreza WRX hatchback wagon, you will need the CURT Trailer Hitch Receiver, part # C11120, which fits the Wagon model with dual exhaust and quad exhaust tips.This CURT hitch is Class I 1-1/4 inch hitch, and includes a drawbar, pin and clip.
To complete your towing setup, you may be interested in the following:
Curt Wiring, part # C56111
1-7/8 Inch Hitch Ball, part # 19256
For hitch accessories such as bike racks, you will be limited to those that are compatible with...
view full answer... - Will Draw Tite Hitch for 2017 Lexus NX 200t F Sport Lower Exhaust
- The mounting flange of the trailer hitch part # 75956 does fit between the frame and the exhaust hanger of your 2017 Lexus NX Turbo, but it should only drop the exhaust at most the thickness of the trailer hitch flange which is no where near the 1-1/2 inch that was mentioned in the review.
Worst case scenario you can take the rubber isolators that hold the exhaust with you to a auto parts store to find a shorter one to compensate for this.
view full answer... - Class III Trailer Hitch Fits for 2015 Subaru Outback Wagon 3.6R with Dual Exhaust
- For your 2015 Subaru Outback Wagon 3.6R Limited with dual exhaust we do offer a 2-inch Class III hitch from Draw-Tite, part # 75673, that fits as long as you do NOT have the Sport model. I also checked with my contact at Curt and their Class III hitch # C13206 is a confirmed fit for the non-Sport edition. I recommend the Draw-Tite # 36284 as it does not require a support strap # 18050 like the Curt hitch does when used with non-trailer loads like bike racks.
If you'll be towing you'll...
view full answer... - What Trailer Hitches Are Available for 2010 Honda Element SC
- The only hitch that we have for your 2010 Honda Element SC is a light-duty Class I hitch with a 1-1/4-inch receiver opening we offer the Curt # C11699 which is intended for the SC with a single exhaust. The 2" versions will not work on your SC.
All three options can be seen on the link at right, along with the installation instructions. All hitches install without drilling and all include the required hardware. I have also linked an installation video that shows you the process of installingthis...
view full answer... - Availability of Class II Trailer Hitch for 2016 Chevrolet Malibu Premier
- We do offer two options in a 1-1/4-inch Class II hitch for your 2016 Chevrolet Malibu Premier that you can view on the linked page.
Both the Draw-Tite # 36652 and the Curt # C12185 are no-drill installations and have similar capacities but Curt rates the installation of their hitch as being a bit less complex than the process required for the Draw-Tite. Both hitches require trimming of fascia components as well as temporary lowering of the exhaust for access to the hitch mounting points,...
view full answer... - Available Trailer Hitch for 2010 Mercedes-Benz GL450
- The only trailer hitch we offer for your 2010 Mercedes-Benz GL450 is the Curt 2-inch Class III hitch # C13102. This hitch presents a fairly involved installation procedure, requiring removal and reattachment of exhaust brackets, exhaust tips, heat shields, and fascia bracket; heat shields may also require trimming. I have linked an installation video along with the written instructions.
This hitch is rated for a maximum trailer weight of 3500-lbs. Also, please note that it is NOT rated...
view full answer... - Hitch Availability and Installation Difficulty for 2014 Toyota RAV4 LE Version
- Your 2014 Toyota RAV4 LE can be equipped with either a 1-1/4-inch Class II or a heavier-duty 2-inch Class III hitch. All options can be seen on the link provided. I recommend a 2-inch Class III hitch like the Curt # C13149 for its higher capacity (and safety margin) and for its generally better compatibility with a broad range of hitch-mount accessories like bike and cargo carriers.
Hitch installation requires mostly basic mechanical skills and hand tools. The only specialized tool needed...
view full answer...
Go To Results